Vision Docs - All your documents in one place

Now available on the app!

Imaging & Vision Handbook More

Improve your level of machine vision know how

BETTER TO KNOW MORE

Benefit from the expert´s knowledge

Vision Docs - Handbook available now

VISION EXPERTISE

AT YOUR FINGERTIPS

Get the Imaging & Vision Handbook! More

Illumination

Selecting and configuring the optimum illumination set-up is one of the most crucial factors when designing a vision system. The missing information caused by incorrect illumination makes subsequent analysis much more difficult or impossible, as missing information in the image can never be recovered by the analysis algorithm.

Our experience over many years is, that this most critical element of a vision system is often underestimated. To select the appropriate illumination for a demanding task with the understanding of why different types of illumination are best suited for specific applications, requires experience and extensive knowledge. Often, even with this experience the only way to to gain confidence in the reliability of an approach is to undertake evaluation trials. At STEMMER IMAGING we have an evaluation laboratory with a wide range of illumination equipment allowing customers to either visit and experiment or send samples for us to undertake a free feasibility study.

A decisive factor when designing the illumination for an application is ensuring that changes in the environmental lighting do not affect the inspection results. If an application requires several stages of software preprocessing before the image can be analysed, the illumination should be re-evaluated, as optimising the illumination can often eliminate the need for costly and time consuming image manipulation and give a far better and more stable overall result.

Because cameras are much less versatile and flexible than the human eye, the illumination needs to be optimised, so that a camera can detect errors that the human eye can see even under poor conditions. Cameras do not see objects; instead, they only see the light reflected from them. By controlling the illumination, one can control how objects appear to the camera. For example, light is reflected differently from a ball bearing than from a flat white label or a printed circuit board and therefore different illumination techniques are required for each.

In the early days of vision, illumination systems were often hand-made for each application. Nowadays, rather than trying to design and develop custom illumination systems, there are many benefits to using off-the-shelf illumination solutions:

  • Cost-effectiveness
    saves time, money and R&D resources, easy access to advice and support

  • Proven and reliable
    lots of units are already in use, long service life, minimal maintenance

  • Repeatability
    high quality units are available in scalable quantities

  • Large variety
    many different devices and techniques are available


More about illumination