CAMERAS

The eyes of any machine vision solution

AT C2 series - 3D cameras with GigE Vision interface

The AT C2 series delivers 3D data at high speed across a GigE Vision compliant interface. The on-board pre-processing of the raw image data provides previously unattainable frame rates for inspection, measurement and sorting in the third dimension. Available in several models with profile widths of 640 pixels and 2040 pixels.

Configuration is made easy by the comprehensive feature set accessible via the plug and play GenICam protocol and is thus directly compatible with any software that is GigE Vision compliant, including STEMMER IMAGING's Common Vision Blox (CVB). A free of charge CVB 2016 CameraSuite licence is included with every camera. With a choice of data rates the AT C2 series can run up to 25 kHz . The in-built memory allows for output of either line profile data, or the ability to build an area profile internally.

Overview

  • 3D acquisition using sheet-of-light triangulation
  • Evaluation of laser line position inside camera
  • Wide selection of 3D camera algorithms: profile-TRSH, profile-MAX, profile-Cog, optionally user specific
  • Maximum profile rate independent of the algorithm used
  • Up to 8 sensor read-out windows (AOIs) freely selectable in image or profile mode
  • Flexible trigger functions for profile and image triggering
  • Easy configuration and integration using the GenICam control grid

Implementation

  • Output of the range map via GigE Vision
  • IP67 rated housing
  • Optional lens protection tube made from anodised aluminium with sealing ring and anti-reflective glass shield
  • Robust M12 industrial connectors
  • RS422 encoder interface with programmable counter for profile trigger generation and integrated detection of direction of motion via I/O panel
  • Data transmission via Gigabit Ethernet. Configurable, opto-isolated I/O's for trigger function and synchronisation (opto-isolation via I/O panel)
  • Supported by Common Vision Blox
  • PC requirement: Gigabit Ethernet
  • Operating systems: Windows 7, XP, Vista, WIN NT, 2000, Linux
  • Robust compact sensors with integrated camera, lens and line lasers also available

Models

  • Resolution 2048 x 1088 pixel or 648 x 488 pixel
  • Pixel size 5.5 x 5.5 µm or 7.4 x 7.4 µm
  • Profiles/s at full frame: 340 or 620
  • Profiles/s at 32 lines: up to 9.5 k
  • Interface: GigE Vision
  • Lens Mount: C or CS-mount
  • Global shutter
  • Data rates up to 25kHz
  • Compact, ruggedized housing rated IP67 and lens protection tube
  • Configurable camera modes: image mode, profile mode
  • Configurable selection of the data output, i.e. height data or height data plus intensity data
  • Programmable number of profiles to form a range map
  • Auto features for triggering, AOI setting and AOI tracking. Integrated noise filter, multi-slope and multi exposure for high dynamic range (HDR) imaging
  • Storage of a user defined start-up camera configuration in a configuration EEPROM
  • Integrated control of external illumination (laser) via I/O panel

Contact us

Technical Support

+44 1252 7800 60
+44 1252 7800 01
support@stemmer-imaging.co.uk

Sales / Consulting

+44 1252 7800 00
+44 1252 7800 01
sales@stemmer-imaging.co.uk

Callback Service

If you have a question or need some information please provide us some data. Our sales team will callback as soon as possible!

Callback Service

to
to
to
of products were found. products were found. Show all
Model Sensor size (mm) Horizontal res. Pixel size Interface Max. profiles/s
AT C2-2040-GIGE 13 2048 5.5 µm GigE Vision 1400
AT C2-2040HS-GIGE 13 2048 5.5 µm GigE Vision 9500
AT C2-640-GIGE 6 648 7.4 µm GigE Vision 6300
Accessories

AT C2-LENSCOVER L=65MM

Lens protective cover for C2 and C5 camera series

  • Required for IP67-protection of lens
  • Max. lens dimensions:
    • Length: 65 mm ...

AT C2-LENSCOVER XXL

Lens protective cover for C2 camera series

  • special version for larger lenses
  • required for IP67-protection of lens
  • max. lens dimensions ...
Cabling accessories

AT C2-CABLE-C2-I/O-OP-10M

AT C2 cable Power + I/O + Laser Control

  • 17 pin M12 female to open wire
  • Cable length see product name

AT C2-CABLE-C2-I/O-OP-20M

AT C2 cable Power + I/O + Laser Control

  • 17 pin M12 female to open wire
  • Cable length see product name

AT C2-CABLE-C2-I/O-OP-3M

AT C2 cable Power + I/O + Laser Control

  • 17 pin M12 female to open wire
  • Cable length see product name

AT C2-CABLE-C2-I/O-OP-5M

AT C2 cable Power + I/O + Laser Control

  • 17 pin M12 female to open wire
  • Cable length see product name

CABLE NET-M12-10M

Ethernet cable to M12

  • 8 pin M12 Male
  • RJ 45
  • Colour: Black
  • Cable length see product name

CABLE NET-M12-15M

Ethernet cable to M12

  • 8 pin M12 Male
  • RJ 45
  • Colour: Black
  • Cable length see product name

CABLE NET-M12-1M

Ethernet cable to M12

  • 8 pin M12 Male
  • RJ 45
  • Colour: Black
  • Cable length see product name

CABLE NET-M12-2.5M

Ethernet cable to M12

  • 8 pin M12 Male
  • RJ 45
  • Colour: Black
  • Cable length see product name

CABLE NET-M12-20M

Ethernet cable to M12

  • 8 pin M12 Male
  • RJ 45
  • Colour: Black
  • Cable length see product name

CABLE NET-M12-25M

Ethernet cable to M12

  • 8 pin M12 Male
  • RJ 45
  • Colour: Black
  • Cable length see product name

CABLE NET-M12-3M

Ethernet cable to M12

  • 8 pin M12 Male
  • RJ 45
  • Colour: Black
  • Cable length see product name

CABLE NET-M12-5M

Ethernet cable to M12

  • 8 pin M12 Male
  • RJ 45
  • Colour: Black
  • Cable length see product name

CABLE NET-M12-7.5M

Ethernet cable to M12

  • 8 pin M12 Male
  • RJ 45
  • Colour: Black
  • Cable length see product name

CABLE NET-M12-TRACK-10M

Ethernet cable to M12

  • Track version
  • M12 A-coded, 8 pin male
  • RJ 45
  • Colour: green
  • Cable length see product name

CABLE NET-M12-TRACK-15M

Ethernet cable to M12

  • Track version
  • M12 A-coded, 8 pin male
  • RJ 45
  • Colour: green
  • Cable length see product name

CABLE NET-M12-TRACK-20M

Ethernet cable to M12

  • Track version
  • M12 A-coded, 8 pin male
  • RJ 45
  • Colour: green
  • Cable length see product name

CABLE NET-M12-TRACK-3M

Ethernet cable to M12

  • Track version
  • M12 A-coded, 8 pin male
  • RJ 45
  • Colour: green
  • Cable length see product name

CABLE NET-M12-TRACK-5M

Ethernet cable to M12

  • Track version
  • M12 A-coded, 8 pin male
  • RJ 45
  • Colour: green
  • Cable length see product name

CABLE NET-M12-TRACK-6M

Ethernet cable to M12

  • Track version
  • M12 A-coded, 8 pin male
  • RJ 45
  • Colour: green
  • Cable length see product name
Mechanical accessories

AT C2-I/O-PANEL

Terminal block for C2 camera

  • with DIN-rail mount
Optical accessories

AT C2-LENSCOVER

Lens protective cover for C2 camera series

  • Required for IP67-protection of lens
  • Max. lens dimensions:
    • length: 30 mm
    • diameter: 36 ...
File Topics Size
Automation Technology AppNote AOI Search & Tracking | 1.0
Application Notes
1.2 MB
Automation Technology AppNote Acquisition Autostart | 1.1
Application Notes
819.3 KB
Automation Technology AppNote C2 Heat Dissipation | 1.1
Application Notes
346.3 KB
Automation Technology AppNote CX Calibration | 1.4
Application Notes
980.0 KB
Automation Technology AppNote FIR Filter | 1.0
Application Notes
538.1 KB
Automation Technology AppNote Matlab Image Acquisition Toolbox | 1.0
Application Notes
871.8 KB
Automation Technology AppNote Multiple Slope | 1.0
Application Notes
247.3 KB
Automation Technology C2
Data sheets
245.2 KB
Automation Technology CXExplorer Quickstart Guide | 1.4
Manuals
2.9 MB
Automation Technology SI Integration Guide | 1.0
Application Notes
472.4 KB
Automation Technology User Manual C2-2040 HS | 1.8
Manuals
1.9 MB
Automation Technology User Manual C2-640 | 1.8
Manuals
1.9 MB
CXExplorer 32Bit | 2.9.0
Software
291.6 MB
CXExplorer_64Bit | 2.9.0
Software
297.8 MB
Stemmer Imaging Integration Guide for Automation Technology CX Series devices | 1.6
Manuals
630.7 KB