ILLUMINATION

Get the right light to improve your solution

Gardasoft RT - Programmable LED lighting controllers

The Gardasoft Vision programmable lighting controllers enable dynamic control of most LED illuminators in modes not possible with other controllers. Signal delays, intensity and duration can be controlled, sequences can be programmed and stored to be accurately repeated when required. Most vision systems using LED illumination can be controlled more easily and be further enhanced by adding a Gardasoft Vision lighting controller.

  • Continuous mode, strobe mode, overdrive
  • Up to 10 times overdriving capabilities
  • Allows short pulses down to 1 µs and high currents up to 20 A per channel
  • Patented SafePower technology:
    • Automatic adaption of the output voltage to the voltage needed for the selected LED illumination
    • Minimal power dissipation and heat in the controller
    • Easy installation process since no special equipment for preventing overheating is needed
    • Possibility to use the 24 VDC power supply of an SPS even if the illumination needs a power supply of more than 30 VDC (e.g. in the case of overdrive operation)
  • Patented SafeSense technology:
    • Allows very precise overdrive
    • Ensures that puls width and duty cycle remain in secure limits
  • Parametrization via RS232, Ethernet interface or - depending on model - manual interface
  • Optional F(ast) function

Models

  • RT 2xx: 2 independent channels
  • RT 4xx: 4 independent channels
  • RT 8xx: 8 independent channels
  • RT CC 4xx: 4 independent channels plus two digital outputs for triggering cameras or for general use
  • SafePower technology provides automatic adaption of the output voltage to the needs of the LED illuminator being used
  • SafeSense technology to protect the LEDs against overheating when overdriven
  • DIN rail mount
  • Up to 20 A in strobe mode
  • Timing (depending on model): 20 µs or 1 µs
  • Power/channel:
    • Continuous mode: 4 A
    • Pulse: 20 (2) A
    • Steps: 5 (0.5) mA
  • Available interfaces: RS232, Ethernet
  • Storage on the controllers is permanent for automatic, computer-independent operation
  • Programming environment under Windows can be integrated into customer's own projects
  • Suitable for use with various LED lights including CCS and Volpi

Contact us

Technical Support

+44 1252 7800 60
+44 1252 7800 01
support@stemmer-imaging.co.uk

Sales / Consulting

+44 1252 7800 00
+44 1252 7800 01
sales@stemmer-imaging.co.uk

Callback Service

If you have a question or need some information please provide us some data. Our sales team will callback as soon as possible!

Callback Service

2 channels

GARDASOFT RT200-2

Gardasoft lighting controller for all LED lighting assemblies

  • Two independently controlled output channels
  • Configuration via Push buttons
  • Max. output current ...

GARDASOFT RT200-20

Controller for LED-illumination

  • Two independent output channels
  • Configuration via "Push Button"
  • Max. output current per channel: pulse current up to ...

GARDASOFT RT200F-20

Controller for LED illumination, fast version

  • Two independent output channels
  • Configuration via "Push Button"
  • Max. output current per channel: pulse ...

GARDASOFT RT220-2

Gardasoft lighting controller for all LED lighting assemblies

  • Two independently controlled output channels
  • Configuration via Ethernet interface
  • Max. output current ...

GARDASOFT RT220-20

Controller for LED-illumination

  • Two independent output channels
  • Configuration via Ethernet interface
  • Max. output current per channel: pulse current up to ...

GARDASOFT RT220F-2

Controller for LED illumination, fast version

  • Two independent output channels
  • Configuration via Ethernet interface
  • Max. output current per channel: pulse ...

GARDASOFT RT220F-20

Controller for LED illumination, fast version

  • Two independent output channels
  • Configuration via Ethernet interface
  • Max. output current per channel: pulse ...

GARDASOFT RT260-2

Gardasoft lighting controller for all LED lighting assemblies

  • Two independently controlled output channels
  • Configuration via RS-232 interface
  • Max. output current ...

GARDASOFT RT260-20

Controller for LED-illumination

  • Two independent output channels
  • Configuration via RS232 interface
  • Max. output current per channel: pulse current up to ...

GARDASOFT RT260F-20

Controller for LED illumination, fast version

  • Two independent output channels
  • Configuration via RS232
  • Max. output current per channel: pulse current ...
4 channels

GARDASOFT RT420-2

Gardasoft lighting controller for all LED lighting assemblies

  • Four independently controlled output channels
  • Configuration via Ethernet interface
  • Max. output current ...

GARDASOFT RT420-20

Gardasoft lighting controller for all LED lighting assemblies

  • Four independently controlled output channels
  • Configuration via Ethernet interface
  • Max. output current ...

GARDASOFT RT420F-2

Gardasoft lighting controller for all LED lighting assemblies, fast version

  • Four independently controlled output channels
  • Configuration via Ethernet interface
  • Max ...

GARDASOFT RT420F-20

Controller for LED-illumination, fast version

  • Four independent output channels
  • Configuration via Ethernet interface
  • Max. output current per channel: pulse current ...

GARDASOFT RT460-2

Gardasoft lighting controller for all LED lighting assemblies

  • Four independently controlled output channels
  • Configuration via RS-232 interface
  • Max. output current ...

GARDASOFT RT460-20

Gardasoft lighting controller for all LED lighting assemblies

  • Four independently controlled output channels
  • Configuration via RS-232 interface
  • Max. output current ...

GARDASOFT RT460F-2

Gardasoft lighting controller for all LED lighting assemblies, fast version

  • Four independently controlled output channels
  • Configuration via RS-232 interface
  • Max ...

GARDASOFT RT460F-20

Gardasoft lighting controller for all LED lighting assemblies, fast version

  • Four independently controlled output channels
  • Configuration via RS-232 interface
  • Max ...

GARDASOFT RTCC420-2

Gardasoft lighting controller for all LED lighting assemblies

  • incl. Timing-controller with 4 opto-isolated inputs and 2 open collector outputs
  • Configuration ...

GARDASOFT RTCC420-20

Gardasoft lighting controller for all LED lighting assemblies

  • incl. Timing-controller with 4 opto-isolated inputs and 2 open collector outputs
  • Configuration ...

GARDASOFT RTCC420F-20

Gardasoft lighting controller for all LED lighting assemblies, fast version

  • incl. Timing-controller with 4 opto-isolated inputs and 2 open collector ...
8 channels

GARDASOFT RT820F-2

Gardasoft lighting controller for all LED lighting assemblies, fast version

  • Eight independently controlled output channels
  • Configuration via Ethernet interface
  • Max ...

GARDASOFT RT820F-20

Gardasoft lighting controller for all LED lighting assemblies, fast version

  • Eight independently controlled output channels
  • Configuration via Ethernet interface
  • Max ...

GARDASOFT RT860F-2

Gardasoft lighting controller for all LED lighting assemblies, fast version

  • Eight independently controlled output channels
  • Configuration via RS-232 interface
  • Max ...

GARDASOFT RT860F-20

Gardasoft lighting controller for all LED lighting assemblies, fast version

  • Eight independently controlled output channels
  • Configuration via RS-232 interface
  • Max ...
Accessories

GARDASOFT RT DINRAIL-KIT2

DIN Rail Mounting kit for GARD RT series (metal)

File Topics Size
Gardasoft RT 200
Data sheets
290.4 KB
Gardasoft RT 400
Data sheets
286.9 KB
Gardasoft RT 800
Data sheets
285.3 KB
Gardasoft RT CC 4
Data sheets
621.7 KB
Gardasoft RT Overview
Data sheets
1.6 MB
Whitepaper Gardasoft LED Light Controllers
Application Notes
805.7 KB