DALSA Genie Nano

SMALLER, FASTER, STRONGER

Break through the GigE limit

Teledyne DALSA Genie Nano - Versatility and high performance in smallest design

The DALSA Genie Nano comprises a multitude of features in a stunningly small and robust housing. The latest CMOS sensors guarantee excellent image quality while the wide temperature range increases system reliability and endurance. Additionally TurboDrive will make you reach speeds you thought to be unachievable with a GigE network.
 

Reduce system complexity and cost

Various features of the Teledyne DALSA Genie Nano help to reduce the need for further components and thus to keep the system complexity and cost low: With the Burst mode, the frame rate can be increased despite of the GigE Vision bandwidth limitation. By combining the high data acquisition rate in the large on-board image buffer and comprehen­sive cycling modes and readout control, applications with fast burst acquisition can be realized. In this mode, images can be acquired at maximum frame rate of the sensor with the data buffered on the main storage of the camera. The buffered data is only transferred during camera idle times e.g. when a conveyor belt moves forward.

With multi-ROI you can define up to 16 ROI's and limit the read-out of image data to the important parts of the object. This reduces processing time and frees computing power.

The Cycling mode allows the usage of various different user-controlled configurations. This means that you can work with different light sources, lighting angles, exposure times, gains etc. for every line. This way, a single pass with a single camera delivers a high amount of information which is comparable to that of multiple cameras or combinations of camera and frame grabber.

Your benefits:

  • You can avoid costly and complex hardware solutions thanks to the reduced data stream that multi-ROI create.
  • Multiple illumination variants of the same object increase failure detection and production security.
  • When various illumination set-ups are mandatory to inspect one object, using the Cycling mode can reduce inspection time.

Speed up your system

TheTurboDrive feature allows an increase of the frame rate while loss-less data compression and transmission via Gigabit Ethernet extend the capability of the data throughput (typically 115 MB/s) achievable with GigE Vision systems. Still all the benefits of GigE networks - like mass market components and protocols and ethernet technology for fast and inexpensive communication for distances of up to 100 m - can be used.

Your benefits:

  • You can run your application faster.
  • You can easily design and support the system.

Get more technical information:

TurboDrive - How does it work (Technology Primer)

Simplify integration into tight spaces

The extremely small and light-weight built of the Teledyne DALSA Genie Nano allows to design very compact OEM and multi camera solutions. Also the integration into existing systems with tight spaces for the machine vision components is simplified.

Your benefits:

  • Thanks to the slim body length of only 21 mm, the use of more expensive angle head versions can be avoided.
  • Decrease the variety of models on stock since - due to the small size - one model can be used for a large number of applications.
  • The possibility for slim designs leads to competitive advantages.
  • Even light-weight robotic applications can be easily achieved with minimum wear and tear to the robot and the possibility for fast movements.

Integrate easily into existing systems

The Teledyne DALSA Genie Nano has two inputs and 2 opto-coupled outputs which allows a versatile set-up with cabling options that best fit your needs.

Your benefits:

  • You can reduce the efforts for implementation and integration.
  • You can implement the system faster and with less cost.
  • As the system comprises fewer components, you can reduce efforts and time taken for repairs.

Protect from data loss

With the Trigger-to-Image Reliability framework, the image capture process is controlled and monitored end-to-end from the trigger to the transfer to the host memory. This way data loss is clearly tracked and the reliability of the overall inspection process is improved.

Your benefit:

  • You can increase the quality of your inspection by sorting out parts that have not been inspected due to shortfalls in the image capture process.

Extend system reliability & endurance

The extended operating temperature range makes the Teledyne DALSA Genie Nano an ideal match for harsh environments. Even with temperature differences there is no need for external cooling or protective housings.

Your benefits:

  • As no additional components are needed to keep the camera at a suitable temperature, you can build very compact test cells.
  • The high temperature range and high MTBF helps to extend camera life and increase system reliability. This leads to fewer or no production stoppages and extendeds the endurance of your machine.

Markets & applications

  • Industrial automation
  • Electronics manufacturing
  • Packaging inspection
  • Semiconductor inspection
  • Traffic / law enforcement
  • Food inspection
  • PCB-AOI (automated optical inspection)
  • Microscopy
  • General machine vision applications
  • Sensor: CMOS
  • Colour and monochrome models as well as models with NIR sensitivity available
  • Resolution: from VGA to 5 million pixels
  • With use of TurboDrive up to 862 images/s at VGA resolution
  • Mount: C-mount or CS-mount
  • Size: 44 mm x 29 mm x 21 mm
  • Weight: 47 g
  • Operating temperature: -20° C to 60° C
  • Multi-colour LED for camera status

Contact us

Technical Support

+44 1252 7800 60
+44 1252 7800 01
support@stemmer-imaging.co.uk

Sales / Consulting

+44 1252 7800 00
+44 1252 7800 01
sales@stemmer-imaging.co.uk

Callback Service

If you have a question or need some information please provide us some data. Our sales team will callback as soon as possible!

Callback Service

to
to
to
to
to
to
of products were found. products were found. Show all
Model Resolution (Megapixel) Frame rate (Hz) Lens mount Horizontal res. Vertical res. Sensor format
DALSA GENIE NANO-C1280 1.3 213 C-mount 1280 1024 1/2"
DALSA GENIE NANO-C1280 CS-MOUNT 1.3 213 CS-mount 1280 1024 1/2"
DALSA GENIE NANO-C1280 IRC 1.3 213 C-mount 1280 1024 1/2"
DALSA GENIE NANO-C1280 IRC CS-MOUNT 1.3 213 CS-mount 1280 1024 1/2"
DALSA GENIE NANO-C1920 CS-MOUNT 2.3 39.8 CS-mount 1920 1200 1/1.2"
DALSA GENIE NANO-C1920 IRC 2.3 39.8 C-mount 1920 1200 1/1.2"
DALSA GENIE NANO-C1930 2.3 44 C-mount 1920 1200 2/3"
DALSA GENIE NANO-C1930 IRC 2.3 44 C-mount 1920 1200 2/3"
DALSA GENIE NANO-C1930 IRC CS-MOUNT 2.3 44 CS-mount 1920 1200 2/3"
DALSA GENIE NANO-C1940 CS-MOUNT 2.3 84 CS-mount 1920 1200 1/1.2"
DALSA GENIE NANO-C1940 IRC 2.3 84 C-mount 1920 1200 1/1.2"
DALSA GENIE NANO-C2020 3.2 53 C-mount 2048 1536 1/1.8"
DALSA GENIE NANO-C2050 3.2 83 C-mount 2048 1536 1/1.8"
DALSA GENIE NANO-C2420 5.1 35 C-mount 2448 2048 2/3"
DALSA GENIE NANO-C2450 5.1 53 C-mount 2448 2048 2/3"
DALSA GENIE NANO-C2590 5.3 19 C-mount 2592 2048 1"
DALSA GENIE NANO-C2590 IRC 5.3 19 C-mount 2592 2048 1"
DALSA GENIE NANO-C640 0.3 862 C-mount 640 480 1/4"
DALSA GENIE NANO-C640 CS-MOUNT 0.3 862 CS-mount 640 480 1/4"
DALSA GENIE NANO-C640 IRC 0.3 862 C-mount 640 480 1/4"
DALSA GENIE NANO-C640 IRC CS-MOUNT 0.3 862 CS-mount 640 480 1/4"
DALSA GENIE NANO-C800 0.5 566 C-mount 800 600 1/3"
DALSA GENIE NANO-C800 CS-MOUNT 0.5 566 CS-mount 800 600 1/3"
DALSA GENIE NANO-C800 IRC 0.5 566 C-mount 800 600 1/3"
DALSA GENIE NANO-C800 IRC CS-MOUNT 0.5 566 CS-mount 800 600 1/3"
DALSA GENIE NANO-M1280 1.3 213 C-mount 1280 1024 1/2"
DALSA GENIE NANO-M1280 CS-MOUNT 1.3 213 CS-mount 1280 1024 1/2"
DALSA GENIE NANO-M1280-NIR 1.3 213 C-mount 1280 1024 1/2"
DALSA GENIE NANO-M1280-NIR CS-MOUNT 1.3 213 CS-mount 1280 1024 1/2"
DALSA GENIE NANO-M1920 2.3 39.8 C-mount 1920 1200 1/1.2"
DALSA GENIE NANO-M1920 CS-MOUNT 2.3 39.8 CS-mount 1920 1200 1/1.2"
DALSA GENIE NANO-M1930 2.3 44 C-mount 1920 1200 2/3"
DALSA GENIE NANO-M1930-NIR 2.3 44 C-mount 1920 1200 2/3"
DALSA GENIE NANO-M1940 2.3 84 C-mount 1920 1200 1/1.2"
DALSA GENIE NANO-M1940 CS-MOUNT 2.3 84 CS-mount 1920 1200 1/1.2"
DALSA GENIE NANO-M2020 3.2 53 C-mount 2048 1536 1/1.8"
DALSA GENIE NANO-M2050 3.2 140 C-mount 2048 1536 1/1.8"
DALSA GENIE NANO-M2420 5.1 35 C-mount 2448 2048 2/3"
DALSA GENIE NANO-M2450 5.1 90 C-mount 2448 2048 2/3"
DALSA GENIE NANO-M2590 5.3 19 C-mount 2592 2048 1"
DALSA GENIE NANO-M2590-NIR 5.3 19 C-mount 2592 2048 1"
DALSA GENIE NANO-M640 0.3 862 C-mount 640 480 1/4"
DALSA GENIE NANO-M640 CS-MOUNT 0.3 862 CS-mount 640 480 1/4"
DALSA GENIE NANO-M640-NIR 100
DALSA GENIE NANO-M640-NIR CS-MOUNT 0.5 566 CS-mount 800 600 1/3"
DALSA GENIE NANO-M800 0.5 566 C-mount 800 600 1/3"
DALSA GENIE NANO-M800 CS-MOUNT 0.5 566 CS-mount 800 600 1/3"
DALSA GENIE NANO-M800-NIR 0.5 566 C-mount 800 600 1/3"
DALSA GENIE NANO-M800-NIR CS-MOUNT 1.3 213 CS-mount 1280 1024 1/2"
Accessories

DALSA ADAPTER GENIE NANO

Tripod mounting plate for Genie Nano

  • 1/4" - 20 Turn UNC-Thread
Cabling accessories

CABLE MISC-FULL-GENIE-NANO-ANG-RO-OP-10M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male angled to open wire
  • Suitable for use with robots ...

CABLE MISC-FULL-GENIE-NANO-ANG-RO-OP-15M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male angled to open wire
  • Suitable for use with robots ...

CABLE MISC-FULL-GENIE-NANO-ANG-RO-OP-1M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male angled to open wire
  • Suitable for use with robots ...

CABLE MISC-FULL-GENIE-NANO-ANG-RO-OP-20M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male angled to open wire
  • Suitable for use with robots ...

CABLE MISC-FULL-GENIE-NANO-ANG-RO-OP-2M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male angled to open wire
  • Suitable for use with robots ...

CABLE MISC-FULL-GENIE-NANO-ANG-RO-OP-3M

I/O cable for DALSA GENIE NANO

  • Screwable 10 pin connector male angled to open wire
  • Suitable for use with ...

CABLE MISC-FULL-GENIE-NANO-ANG-RO-OP-5M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male angled to open wire
  • Suitable for use with robots ...

CABLE MISC-FULL-GENIE-NANO-ANG-TR-OP-10M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male angled to open wire
  • Drag chain suitable
  • Cable length ...

CABLE MISC-FULL-GENIE-NANO-ANG-TR-OP-15M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male angled to open wire
  • Drag chain suitable
  • Cable length ...

CABLE MISC-FULL-GENIE-NANO-ANG-TR-OP-1M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male angled to open wire
  • Drag chain suitable
  • Cable length ...

CABLE MISC-FULL-GENIE-NANO-ANG-TR-OP-20M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male angled to open wire
  • Drag chain suitable
  • Cable length ...

CABLE MISC-FULL-GENIE-NANO-ANG-TR-OP-2M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male angled to open wire
  • Drag chain suitable
  • Cable length ...

CABLE MISC-FULL-GENIE-NANO-ANG-TR-OP-3M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male angled to open wire
  • Drag chain suitable
  • Cable length ...

CABLE MISC-FULL-GENIE-NANO-ANG-TR-OP-5M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male angled to open wire
  • Drag chain suitable
  • Cable length ...

CABLE MISC-FULL-GENIE-NANO-ANGLE-OP-10M

I/O cable for DALSA GENIE NANO

  • Screwed 10-pin connector male angled to open wire
  • Incl. power supply line
  • Cable ...

CABLE MISC-FULL-GENIE-NANO-ANGLE-OP-15M

I/O cable for DALSA GENIE NANO

  • Screwed 10-pin connector male angled to open wire
  • Incl. power supply line
  • Cable ...

CABLE MISC-FULL-GENIE-NANO-ANGLE-OP-1M

I/O cable for DALSA GENIE NANO

  • Screwed 10-pin connector male angled to open wire
  • Incl. power supply line
  • Cable ...

CABLE MISC-FULL-GENIE-NANO-ANGLE-OP-20M

I/O cable for DALSA GENIE NANO

  • Screwed 10-pin connector male angled to open wire
  • Incl. power supply line
  • Cable ...

CABLE MISC-FULL-GENIE-NANO-ANGLE-OP-2M

I/O cable for DALSA GENIE NANO

  • Screwed 10-pin connector male angled to open wire
  • Incl. power supply line
  • Cable ...

CABLE MISC-FULL-GENIE-NANO-ANGLE-OP-3M

I/O cable for DALSA GENIE NANO

  • Screwed 10-pin connector male angled to open wire
  • Incl. power supply line
  • Cable ...

CABLE MISC-FULL-GENIE-NANO-ANGLE-OP-5M

I/O cable for DALSA GENIE NANO

  • Screwed 10-pin connector male angled to open wire
  • Incl. power supply line
  • Cable ...

CABLE MISC-FULL-GENIE-NANO-I/O-BOX-10M

I/O cable for DALSA GENIE NANO

  • 10 pin connector male with crews to terminal block
  • Cable length see product ...

CABLE MISC-FULL-GENIE-NANO-I/O-BOX-5M

I/O cable for DALSA GENIE NANO

  • 10-pin connector male with crews to terminal block
  • cable length see product name

CABLE MISC-FULL-GENIE-NANO-OP-10M

I/O cable for DALSA GENIE NANO

  • 10 pin connector male to open wire
  • Cable length see product name

CABLE MISC-FULL-GENIE-NANO-OP-15M

I/O cable for DALSA GENIE NANO

  • 10 pin connector male to open wire
  • Cable length see product name

CABLE MISC-FULL-GENIE-NANO-OP-1M

I/O cable for DALSA GENIE NANO

  • 10 pin connector male to open wire
  • Cable length see product name

CABLE MISC-FULL-GENIE-NANO-OP-20M

I/O cable for DALSA GENIE NANO

  • 10 pin connector male to open wire
  • Cable length see product name

CABLE MISC-FULL-GENIE-NANO-OP-25M

I/O cable for DALSA GENIE NANO

  • 10 pin connector male to open wire
  • Cable length see product name

CABLE MISC-FULL-GENIE-NANO-OP-2M

I/O cable for DALSA GENIE NANO

  • 10 pin connector male to open wire
  • Cable length see product name

CABLE MISC-FULL-GENIE-NANO-OP-3M

I/O cable for DALSA GENIE NANO

  • 10 pin connector male to open wire
  • Cable length see product name

CABLE MISC-FULL-GENIE-NANO-OP-5M

I/O cable for DALSA GENIE NANO

  • 10 pin connector male to open wire
  • Cable length see product name

CABLE MISC-FULL-GENIE-NANO-ROBOT-OP-10M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male to open wire
  • Suitable for use with robots
  • Cable ...

CABLE MISC-FULL-GENIE-NANO-ROBOT-OP-15M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male to open wire
  • Suitable for use with robots
  • Cable ...

CABLE MISC-FULL-GENIE-NANO-ROBOT-OP-1M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male to open wire
  • Suitable for use with robots
  • Cable ...

CABLE MISC-FULL-GENIE-NANO-ROBOT-OP-20M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male to open wire
  • Suitable for use with robots
  • Cable ...

CABLE MISC-FULL-GENIE-NANO-ROBOT-OP-2M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male to open wire
  • Suitable for use with robots
  • Cable ...

CABLE MISC-FULL-GENIE-NANO-ROBOT-OP-3M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male to open wire
  • Suitable for use with robots
  • Cable ...

CABLE MISC-FULL-GENIE-NANO-ROBOT-OP-5M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male to open wire
  • Suitable for use with robots
  • Cable ...

CABLE MISC-FULL-GENIE-NANO-TRACK-OP-10M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male to open wire
  • Drag chain suitable
  • Cable length see ...

CABLE MISC-FULL-GENIE-NANO-TRACK-OP-15M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male to open wire
  • Drag chain suitable
  • Cable length see ...

CABLE MISC-FULL-GENIE-NANO-TRACK-OP-1M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male to open wire
  • Drag chain suitable
  • Cable length see ...

CABLE MISC-FULL-GENIE-NANO-TRACK-OP-20M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male to open wire
  • Drag chain suitable
  • Cable length see ...

CABLE MISC-FULL-GENIE-NANO-TRACK-OP-2M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male to open wire
  • Drag chain suitable
  • Cable length see ...

CABLE MISC-FULL-GENIE-NANO-TRACK-OP-3M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male to open wire
  • Drag chain suitable
  • Cable length see ...

CABLE MISC-FULL-GENIE-NANO-TRACK-OP-5M

I/O cable for DALSA GENIE NANO

  • Screwable 10-pin connector male to open wire
  • Drag chain suitable
  • Cable length see ...

CABLE TRIGGER-GENIE-NANO-10M POE

Trigger cable for Dalsa Genie Nano cameras (POE) with BNC-Connector

  • Cable length see product name

CABLE TRIGGER-GENIE-NANO-30M POE

Trigger cable for Dalsa Genie Nano cameras (POE) with BNC-Connector

  • Cable length see product name

CABLE TRIGGER-GENIE-NANO-5M POE

Trigger cable for Dalsa Genie Nano cameras (POE) with BNC-Connector

  • Cable length see product name

CABLE TRIGGER-GENIE-NANO-EXT-PWR-10M

Trigger cable for Dalsa Genie Nano cameras with BNC-Connector
and power support to open ends

  • Cable length see product name

CABLE TRIGGER-GENIE-NANO-EXT-PWR-5M

Trigger cable for Dalsa Genie Nano cameras with BNC-Connector
and power support to open ends

  • Cable length see product name
File Topics Size
CVB TurboDrive 1.0 - Application Note
Application Notes
1.1 MB
CVB TurboDrive Demo
Software
585.0 KB
Teledyne DALSA - Portfolio overview
Data sheets
4.3 MB
Teledyne DALSA Genie Nano C1280
Data sheets
629.2 KB
Teledyne DALSA Genie Nano C1920
Data sheets
1.3 MB
Teledyne DALSA Genie Nano C1940
Data sheets
1.3 MB
Teledyne DALSA Genie Nano C640
Data sheets
629.3 KB
Teledyne DALSA Genie Nano C800
Data sheets
629.3 KB
Teledyne DALSA Genie Nano Family Brochure | 2016/8
Data sheets
1.6 MB
Teledyne DALSA Genie Nano M1280
Data sheets
548.7 KB
Teledyne DALSA Genie Nano M1920
Data sheets
1.2 MB
Teledyne DALSA Genie Nano M1940
Data sheets
1.3 MB
Teledyne DALSA Genie Nano M640
Data sheets
548.6 KB
Teledyne DALSA Genie Nano M800
Data sheets
548.8 KB
Teledyne DALSA Genie Nano Series Manual | 012
Manuals
8.1 MB
Teledyne DALSA Genie NanoXL-M4090 | 2016/11
Data sheets
532.2 KB
Teledyne DALSA Genie NanoXL-M5100 | 2016/11
Data sheets
523.6 KB
Teledyne DALSA TurboDrive - How does it work (Technology Primer)
Technical Tips
1.1 MB
Teledyne DALSA: Genie Nano product presentation
Documents
629.9 KB
TurboDrive Performance Tool
Software
6.5 MB