Image Creation and Reference Counting in Common Vision Blox

In my application I create new images at runtime using the DLL function CreateXXXImage. The application is running stable for some time, but then crashes with an OutOfMemory message. Where is the memory leak?

Missing Camera Definition Files in the IFC/ITEX Camera Configurator

I have bought a camera from Stemmer (or one of its local distributors) that is supposed to run with the IFC/ITEX. However, when using the respective camera configurator I cannot find a camera definition file that seems appropriate for this camera. Why?

Problems with some CVB Controls in Borland C++ Builder

I get compilation errors when inserting e. g. the PrintQual Control in Borland C++ Builder. Why?

FAQ (Teledyne DALSA)

CamExpert problems saving write-protected config files

Why are changes in a camera config file sometimes not accepted when they are saved by the File->Save menu entry?

Changing Shutter Time of PULNIX TM1405GE Programmatically

I would like to programmatically change the shutter time of my PULNIX TM1405GE. What do I need to do?

configpxd.exe (PXD-1000) Does Not Show Live Video

When running configpxd.exe (part of ImageNation PXD-1000 Board Level Library) no live image is shown. However no or status messages show up - what is wrong here?

ConfigPXD.exe Reports Missing ImageNation PXD-1000

When starting configpxd.exe from the ImageNation PXD Win32 driver collection I get the message "PXD-1000 not in the PCI slot".
The application did run previously without any problems. Is the frame grabber card or the PCI slot broken?

Creating applications for ipd NetSight II / Windows XP Embedded

What has to be taken into account when using the Windows XP Embedded operating system with ipd NetSight II?

CVB BayerToRGB- Versus IFC5.5 BayerTo RGB Conversion

Why should I convert the Bayer raw image with the CVB BayerToRGB tool instead of with the IFC5.5 Bayer conversion methods I've already bought?

Emulating a Standard COM Port on the PCCamLink Under IFC 5.2

How can I emulate a standard COM port on the PCCamLink under IFC 5.2 to use the Windows Hyper Terminal or other standard software with the built-in serial interface of the PCCamLink?

ExSync and PRI signal output on PCCamLink DSub 26 Connector

How can I output the ExSync and the PRI signal on the 26Pin-DSub connector of PCCamLink?

Framegrabbers Inside Embedded PCs

I have a small embedded PC, and have installed a framegrabber in it. However the operating system does not recognize it, and the software keeps saying that the board is not present.

Framerate of JAI M2 and PCCamLink in CVB

Why does the IFC camera configurator measure a frame rate of 30 fps on a JAI CV M2 (in 10 Bit mode) attached to a PCCamLink while I can only measure significantly less than 30 fps in CVB?

GetGrabStats Error With PC-CamLink and IFC 5.2

The IFC-function GetGrabStats returns strange values for the PC-Camlink. With other IFC based boards it works fine.

IFC Camera Configurator Unable to Find a Grabber

I installed my IFC 5.x.x Board Level Library, but the IFC Camera Configurator is unable to detect any Coreco Grabber in my system although the windows device manager indicates a proper installation of my board. What can I do?

IFC Reports a Version Conflict

On my system, IFC and ITEX are installed simultaneously. Now the IFC reports a version conflict. Who can I get rid of this?

JAI CV-M4 CL Camera Link Standard Compatibility

The LEN and FEN signals of the JAI CV-M4 CL are active LOW. Is the camera not compatible to the Camera Link Standard which recommends a HIGH signal?

LinLog and External Exposure control

I use for my Photonfocus camera the PFRemote Control Tool . Why does LinLog not work when using a trigger mode with external Exposure control

Live Acquisition Does Not Start With Pulnix TM9701 and Digital Frame Grabber

I have connected my Pulnix TM9701 camera to a PCDig/AM-Dig16/MTD frame grabber, and it displays images at the correct framerate, but all I get is the same image over and over again - even on an analog monitor/frame grabber. Why?

Live Video Error Message While Starting ConfigPXD.exe

After installing the ImageNation PXD Win32 driver V1.07B for the digital frame grabber PXD-1000, the configpxd.exe application starts up with the message box: "This application will run without the ability to grab live video. Probable cause: PXD frame grabber not installed". What is missing here?

Malfunction of DALSA SP-11/-12/-13/-14/-15/-16

My camera system worked well in the laboratory. After resettling it to the plant, there are black or white streaks occuring sporadically in the camera images. What's wrong?

Minimum Framegrabber Timeout in Common Vision Blox

What is the minimum timeout for a Framegrabber I can set in Common Vision Blox?

Missing *.exo Files with Coreco Imaging (Formerly Imaging Technology) Framegrabbers

In the Camera configurator or when loading the respective Common Vision Blox driver, I get an error on the error message that an *.exo file is missing. What is that file, and where is it?

Missing Camera Definition Files in the IFC/ITEX Camera Configurator

I have bought a camera from Stemmer (or one of its local distributors) that is supposed to run with the IFC/ITEX. However, when using the respective camera configurator I cannot find a camera definition file that seems appropriate for this camera. Why?

More Than One Imagenation Grabber in a System

Can I put more than one Imagenation Frame Grabber (PX-610, PXC200, PXD1000, PXR800) in my computer?

PC gets stuck with PX-610A while booting up

After installing the PX-610A drivers from CVB or Imagenation my PC gets stuck or shows a blue screen while booting up. What's the reason ?

Photonfocus MV-Dxxx and PFRemote

I want to configure a Photonfocus Camera from the MV-Dxxx series with PFRemote. When opening PFRemote I get the following Error message: Could not open Device Camwrapper: could not load DLL

Power Consumption of ImageNation PXC200 Series Boards

What is the power consumption of an ImageNation PXC200 series board?

Problems installing the ViperRGB Device Driver 4.00 under Winindows XP

I have problems installing the ViperRGB Device Driver 4.00 under Windows XP. What can I do?

Problems With PC-RGB Rev A9 Frame Grabbers

The IFC is unable to initialize the PCRGB and CVB can not load the CVPCRGB.vin driver what's wrong?

PXC200A* and Hardware Detection

I installed my PXC200A* but after every reboot, Windows detects two new hardware devices. What is wrong?

Saving Images in the IFC/ITEX Camera Configurator

Using the camera configurator I simply want to save an image to disk. But although I get no error message, no image is written. Why?

Software Trigger under Sapera

How do I send software trigger under Sapera?

Using IFC with ANSI C Compilers

Is it possible to code IFC applications using an ANSI C compiler instead of the Visual C++ compiler?

When loading the Xcelera CVB Driver the debug window allways opens.

When loading the CVXceleraCLPX4.vin driver from any CVB application, the debug console windows allways opens and shows debug information. Even when the debug error log parameter in the .ini file is turned off. In addition the message: "INI-File not found -> Default values will be used." is shown in the error log.

Filtre