HOW TO SOLVE COMPLICATED

ILLUMINATION SET UPS >

Learn more about intelligent lighting | Part 2

Read more
Innovative camera features

GET MORE OUT OF YOUR GIGE

VISION SYSTEM ARCHITECTURE >

Learn more about two great innovative camera features

Read more

LINE SCAN BAR >

Fast and precise, flat and wide

Read more

Cameras

When selecting a camera for an application three factors need to be considered: The performance of the sensor, the camera features, as well as the interface technology and image transfer.

Camera types

There are two main camera types used for machine vision applications: Area scan cameras and line scan cameras. Generally the use of an area scan camera is technically less demanding than a line scan camera, therefore area scan cameras are the preferred solution for general machine vision systems, while line scan can create solutions not easily achieved using area scan. In the following sections both types of cameras are discussed along with examples of application areas, highlighting the need for both, and the fact that in some applications either can be appropriate.

The basic sensor technologies are common to both types. The term "area" refers to the type of sensor inside the camera - one that occupies an area rather than a single line, as is the case with line scan cameras. The image produced by an area scan sensor is two dimensional, historically with an aspect ratio of 4:3. The ratio has been inherited from broadcast specifications, although there are many area scan cameras with square or rectangular sensors that do not conform to this 'standard video'. The rapid development of high definition TV is also increasing the demand for wide format cameras with different aspect ratios such as 16:9.


Learn more