+44 1252 7800 60
+44 1252 7800 01
support@stemmer-imaging.co.uk
Silicon Software microEnable 4
- Programmable PCIe frame grabber
- Three different interface technologies:
- CameraLink
- Gigabit Ethernet
- LVDS
- PCI Express x1 Gen 1 (single lane) and PCI Express x4 Gen 1 (quad lane)
- DMA900 technology for guaranteed data transfer bandwidth of 850 Mbyte/s
- Up to 512 MB on-board memory for image buffering
- Available as image acquisition card (A series) and as image processing card (V series)
- Power over CameraLink (PoCL) and Power over Ethernet (PoE) support
- Low latency for precise triggering capability and feedback channels to camera
- Preprocessing or pre-analysis of image data eases the load on the host CPU
- Supports Common Vision Blox (CVB)
- Fully compatible with add-on products such as processor extension boards and trigger boards
- Comprehensive SDK environment
- Interface connections:
- CameraLink connections under CameraLink
- Network connection under Gigabit Ethernet
- LVDS connections under LVDS
- A series: Robust acquisition solution with high-performance preprocessing functions
- V series:
- Robust acquisition solution with high-performance preprocessing functions
- FPGA resources for individual imaging
- Individually programmable via Visual Applets
- Utilisation of Smart Applets application libraries
- Interface types
- CameraLink (CL) interface:
- Supports CameraLink Base, DualBase, Medium and Full configuration including Deca mode
- Pixel Clock up to 85 MHz
- Additional high-quality functions for image acquisition such as advanced colour reconstruction with edge treatment by a Bayer filter camera (CFA), dual shading correction and noise filtering
- Gigabit Ethernet(GigE) interface:
- Up to 4 GigE Vision camera inputs
- Supports cable lengths of several hundred metres
- Supports GenICam
- CameraLink (CL) interface:
Contact us
Technical Support
Sales / Consulting
+44 1252 7800 00
+44 1252 7800 01
sales@stemmer-imaging.co.uk
Callback Service
If you have a question or need some information please provide us some data. Our sales team will callback as soon as possible!
Models
Frame Grabber for following PC interface:
PCIe x1 for the acquisition of digital sources via
2 x CameraLink (1 x ...
SISO MICROENABLE IV - AD1-mPoCL
Frame Grabber for following PC interface:
PCIe x1 for the acquisition of digital sources via
2 x CameraLink (1 x ...
SISO MICROENABLE IV - AD1-PoCL
Frame Grabber for following PC interface:
PCIe x1 for the acquisition of digital sources via
2 x CameraLink (1 x ...
Frame Grabber for following PC interface:
PCIe x4 for the acquisition of digital sources via
2 x CameraLink (1 x ...
SISO MICROENABLE IV - AD4-PoCL
Frame Grabber for following PC interface:
PCIe x4 for the acquisition of digital sources via
2 x CameraLink (1 x ...
Frame Grabber for following PC interface:
PCIe x 4 for the acquisition of digital sources via 4 x GigE
- max ...
SISO MICROENABLE IV - AQ4-GPoE
Frame Grabber for following PC interface:
PCIe x 4 for the acquisition of digital sources via 4 x GigE
- max ...
SISO MICROENABLE IV - AS1-POCL
Frame Grabber for following PC interface:
PCIe x1 for the acquisition of digital sources via
1 x CameraLink (1 x ...
Frame Grabber for following PC interface:
PCIe x1 for the acquisition of digital sources via
2 x CameraLink (1 x ...
Frame Grabber for following PC interface:
PCIe x4 for the acquisition of digital sources via
2 x CameraLink (1 x ...
SISO MICROENABLE IV - VD4-PoCL
Frame Grabber for following PC interface:
PCIe x4 for the acquisition of digital sources via
2 x CameraLink (1 x ...
Frame Grabber for following PC interface:
PCIe x 4 for the acquisition of digital sources via 4 x GigE
- max ...
SISO MICROENABLE IV - VQ4-GPoE
Frame Grabber for following PC interface:
PCIe x 4 for the acquisition of digital sources via 4 x GigE
- Power ...
Accessories
Breakout board for microEnable 4 to distribute Cameralink signals
- supports two Base up to Full configuration
- enables distributed computing
TTL Triggerboard for microEnable 4 and 5 series
- Triggerboard for TTL
- 8 inputs
- 8 outputs
- connection with 2*D15 female ...
Optocoupled trigger extension board for microEnable 4 and 5 series
- Connection via 2 x SUB-D15 female sockets
- 8 inputs
- 8 ...
PixelPlant PX200e coprocessorboard
- Xilinx XC3S4000 FPGA
- 512MB DDR-RAM
- compatible to microEnable IV V-series
- Digital I/O (8 IN, 8 OUT)
RunTime license for Smart Applet 3D laser triangulation
Center of Gravity
- Compatible with mE4 V-series boards
RunTime license code for extended SmartApplets library
- Contains segmentation and classification
- Compatible with mE4 V-series boards
SISO SMARTAPPLETS RT PEAK DETECTOR
RunTime license code for Peak Detector SmartApplets Library
- Compatible with mE4 V-series boards
